# How to apply concentrated load in beam example

**URL:** <https://community.freefem.org/t/how-to-apply-concentrated-load-in-beam-example/173>\
**Category:** General Discussion\
**Created:** [November 6, 2019, 9:22am UTC](https://community.freefem.org/t/how-to-apply-concentrated-load-in-beam-example/173 "2019-11-06T09:22:21Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![raymonraymon](https://avatars.discourse-cdn.com/v4/letter/r/e9a140/32.png) [@raymonraymon](https://community.freefem.org/u/raymonraymon)\
**Post date:** [November 6, 2019, 9:22am UTC](https://community.freefem.org/t/how-to-apply-concentrated-load-in-beam-example/173/1 "2019-11-06T09:22:21Z")

</div>

I found beam test in the manual，  
I would like to compare with other commercial software with this example.  
So I want to know how to apply concentrated load on the beam’s corner.

---

<div class="post-metadata">

**Author:** ![hezl09](https://avatars.discourse-cdn.com/v4/letter/h/f07891/32.png) [@hezl09](https://community.freefem.org/u/hezl09)\
**Post date:** [November 16, 2020, 4:47pm UTC](https://community.freefem.org/t/how-to-apply-concentrated-load-in-beam-example/173/2 "2020-11-16T16:47:47Z")

</div>

Hi Ruishan, I’m interested in this problem as well. Have you found the solution? Thanks!

---

<div class="post-metadata">

**Author:** ![hezl09](https://avatars.discourse-cdn.com/v4/letter/h/f07891/32.png) [@hezl09](https://community.freefem.org/u/hezl09)\
**Post date:** [January 1, 2021, 8:17pm UTC](https://community.freefem.org/t/how-to-apply-concentrated-load-in-beam-example/173/3 "2021-01-01T20:17:00Z")

</div>

After some exposure to the software, now I realize the only way is to use a small segment of line to simulate the point with concentrated loading.